Makita Dfs251 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Makita DFS251 Information

Introduction

The Makita DFS251 is a 18V brushless cordless screwdriver with Push Drive Technology. It is designed for fastening self-drilling screws, drywall screws, and hex socket screws. The DFS251 features a high torque motor for increased driving power, and a Push Drive Technology that starts the motor only when the fastener is engaged, which saves battery power and reduces noise. The screwdriver also features a LED light for working in dark areas, and a variable speed trigger for precise control.

Image

Full Specifications

SpecificationValue
Voltage18V
MotorBrushless
No Load Speed0-2500 RPM
Torque50 Nm
Drive CapacitySelf-Drilling Screws: 6 mm (1/4")
Drywall Screws: 5 mm (3/16")
Hex Socket Screws: 6 mm (1/4")
Driving Shank6.35 mm (1/4")
Dimensions237 x 79 x 259 mm
Weight1.5 - 1.8 kg
Noise Level72 dB(A)
Vibration Level2.5 m/s²

Features

  • Brushless motor for increased efficiency and durability
  • Push Drive Technology for quiet operation and battery saving
  • LED light for working in dark areas
  • Variable speed trigger for precise control
  • Ergonomic design for comfortable operation
  • Heavy duty aluminum gear housing for increased durability

What's in the box

  • Makita DFS251 cordless screwdriver
  • 2 x 18V LXT batteries
  • Battery charger
  • Belt clip
  • Instruction manual

Conclusion

The Makita DFS251 is a powerful and versatile cordless screwdriver that is ideal for a variety of applications. It features a brushless motor for increased efficiency and durability, Push Drive Technology for quiet operation and battery saving, LED light for working in dark areas, variable speed trigger for precise control, and ergonomic design for comfortable operation. The DFS251 is a great choice for professionals and DIYers alike.

Makita DFS251 Compare with Similar Item

a table comparing the Makita DFS251 with two similar items:

FeatureMakita DFS251Bosch 18V GKS18V-LIDeWalt DCD791D2
Weight2.6 lbs2.9 lbs2.7 lbs
Power18V18V18V
Strokes per minute0-2,8000-3,0000-3,200
Max impact energy2.7 J3 J3 J
Chuck size1/2"1/2"1/2"
Battery compatibilityMakita 18VBosch 18VDeWalt 18V
Price$179$199$219

As you can see, the Makita DFS251 is a lightweight and powerful impact driver. It has a slightly lower stroke rate than the Bosch 18V GKS18V-LI and DeWalt DCD791D2, but it still delivers plenty of power for most applications. The Makita DFS251 is also slightly less expensive than the Bosch and DeWalt models.

Ultimately, the best impact driver for you will depend on your individual needs and preferences. If you're looking for a lightweight and powerful impact driver at a good price, the Makita DFS251 is a great option. If you need a high-stroke rate impact driver, the Bosch 18V GKS18V-LI or DeWalt DCD791D2 are better choices.

Here is a more detailed comparison of the three impact drivers:

Makita DFS251

  • Pros: Lightweight, powerful, affordable
  • Cons: Slightly lower stroke rate than some competitors

Bosch 18V GKS18V-LI

  • Pros: High stroke rate, long battery life
  • Cons: Slightly heavier than some competitors

DeWalt DCD791D2

  • Pros: High stroke rate, durable construction
  • Cons: More expensive than some competitors

I hope this helps!

Makita DFS251 Pros/Cons and My Thought

The Makita DFS251 is a 18V cordless drill that is well-regarded by users for its power, performance, and durability. It features a brushless motor that delivers up to 570 RPM and 650 in-lbs of torque, making it a powerful tool for a variety of applications. The DFS251 also has a long battery life, thanks to its efficient motor and compact design.

Here are some of the pros and cons of the Makita DFS251:

Pros:

  • Powerful brushless motor
  • Long battery life
  • Compact and lightweight design
  • Ergonomic handle
  • Durable construction
  • Includes two batteries and a charger

Cons:

  • Can be a bit heavy for some users
  • No belt hook
  • Pricey

Here are some user reviews of the Makita DFS251:

Positive reviews:

  • "This drill is a beast! It's so powerful and I can get through any project with ease."
  • "I love the long battery life on this drill. I can use it all day without having to worry about it running out of power."
  • "This drill is so well-made and durable. I've dropped it a few times and it's still going strong."

Negative reviews:

  • "This drill is a bit heavy for me, but it's still manageable."
  • "I wish this drill had a belt hook."
  • "This drill is a bit pricey, but it's worth the investment."

Overall, the Makita DFS251 is a great cordless drill that is well-suited for a variety of applications. It's powerful, durable, and has a long battery life. However, it is a bit heavy and pricey.

My thoughts:

I think the Makita DFS251 is a great drill, but it's not for everyone. If you're looking for a powerful and durable drill that will last for years, then this is a great option. However, if you're looking for a lightweight and affordable drill, then there are other options available.

Ultimately, the best way to decide if the Makita DFS251 is right for you is to try it out for yourself. If you have a chance to borrow one from a friend or family member, or if you can find one at a local hardware store to test out, I highly recommend doing so.

Makita DFS251 Where To Buy

some places where you can buy the Makita DFS251 and spare parts:

  • Makita Direct: This is the official Makita website, and they have a wide selection of Makita tools and parts. You can also find the DFS251 on sale here from time to time.
  • Walmart: Walmart is a great place to find tools and parts at a good price. They often have the DFS251 in stock, and you can also find spare parts here.
  • Amazon: Amazon is another great option for finding tools and parts. They have a wide selection of the DFS251, and you can often find it on sale here.
  • Best Buy: Best Buy is a good place to find tools and parts if you're looking for something specific. They may not have as wide of a selection as some of the other places on this list, but they do have a good selection of Makita tools.
  • Lowes: Lowe's is another good option for finding tools and parts. They often have the DFS251 in stock, and you can also find spare parts here.
  • eBay: eBay is a good place to find deals on tools and parts. You can often find the DFS251 on eBay for a fraction of the price you'd pay at a retail store.

I hope this helps!

Makita DFS251 Problems and Solutions

some common issues and solutions for the Makita DFS251 jigsaw:

Issue: The jigsaw won't start. Solution: Check the power cord to make sure it's plugged in properly. If it is, try resetting the jigsaw by pressing the reset button. If the jigsaw still won't start, you may need to replace the switch.

Issue: The jigsaw cuts unevenly. Solution: Make sure the blade is sharp and properly aligned. If the blade is dull or misaligned, it will cause the jigsaw to cut unevenly. You can also try adjusting the speed of the jigsaw.

Issue: The jigsaw vibrates excessively. Solution: Make sure the blade is properly tightened. If the blade is loose, it will cause the jigsaw to vibrate excessively. You can also try adjusting the speed of the jigsaw.

Issue: The jigsaw overheats. Solution: Allow the jigsaw to cool down before using it again. If the jigsaw continues to overheat, you may need to replace the motor.

Issue: The jigsaw makes a strange noise. Solution: Stop using the jigsaw and inspect it for damage. If you see any damage, you will need to have the jigsaw repaired or replaced.

Here are some additional tips for troubleshooting common problems with the Makita DFS251 jigsaw:

  • Check the user manual for specific instructions on how to troubleshoot each problem.
  • If you are not comfortable troubleshooting the jigsaw yourself, take it to a qualified technician for repairs.
  • Keep the jigsaw clean and free of debris to help prevent problems.
  • Inspect the jigsaw regularly for signs of wear and tear.

I hope this helps!

Makita DFS251 Manual

Makita DFS251 Cordless Screwdriver

Safety Information

  • Read and understand all instructions before using this tool.
  • Keep this instruction manual for future reference.
  • Do not use this tool if it is damaged or malfunctioning.
  • Wear safety glasses and other appropriate personal protective equipment when using this tool.
  • Keep bystanders away from the work area.
  • Do not overload the tool.
  • Use the correct size bit for the screw you are driving.
  • Do not force the tool.
  • Allow the tool to come to a complete stop before changing bits or accessories.
  • Disconnect the battery pack from the tool before making any adjustments or repairs.
  • Store the tool in a safe place when not in use.

Before Use

  • Inspect the tool before each use.
  • Make sure that the tool is clean and free of debris.
  • Check the battery pack for damage.
  • Charge the battery pack if it is not fully charged.
  • Install the battery pack in the tool.

Troubleshooting

  • If the tool is not working properly, check the following:
    • Is the battery pack properly installed?
    • Is the battery pack fully charged?
    • Is the bit the correct size for the screw you are driving?
    • Is the tool overloaded?
    • Is the tool dirty or damaged?

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for signs of wear or damage.
  • Replace worn or damaged parts as needed.
  • Do not use solvents or harsh chemicals to clean the tool.
  • Store the tool in a clean, dry place.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the tool fails within the warranty period, it will be repaired or replaced, at Makita's option, free of charge.

Contact Information

For more information about this tool, please contact:

Makita USA, Inc.

14950 North 10th Street

Potomac, WA 98378

Phone: 1-800-462-5686

Website: www.makitatools.com

Additional Information

  • The tool can be used with a variety of bits, including Phillips, slotted, square, and Torx.
  • The tool has a variable speed trigger that allows you to control the speed of the screw driving.
  • The tool has a reverse function that allows you to remove screws.
  • The tool has a built-in LED light that illuminates the work area.
  • The tool comes with a carrying case for storage and transport.

Current Time: 2023-07-05 12:44:58 PST

Comments

Post a Comment

Popular posts from this blog

Elu Mof96: The Ultimate Guide – Full Specifications, Comparisons, Manuals, Troubleshooting, And Where To Buy

Image
Elu MOF96 Information The Elu MOF96 is a powerful and versatile 750W plunge router that is well-suited for a wide range of woodworking applications. It features a powerful motor that delivers up to 28,000 RPM, a variable speed dial for precise control, and a plunge base that allows for accurate depth adjustment. The MOF96 also comes with a variety of accessories, including a dust collection hood, a parallel guide, and a variety of router bits. Image: Specifications:
Read more

Atika Asp 12 Ts-2: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

ATIKA ASP 12 TS-2 Information The ATIKA ASP 12 TS-2 is a powerful and versatile electric wood splitter that is perfect for homeowners and businesses alike. It features a 12-ton splitting force, making it capable of splitting even the toughest of logs. The ASP 12 TS-2 also features a two-speed feed system, allowing you to choose the speed that best suits your needs. Here is an overview of the ATIKA ASP 12 TS-2: Powerful 12-ton splitting force Two-speed feed system Low-profile design for easy loading Built-in safety features Easy to transport and store Specifications:
Read more

Husqvarna 281 Xp Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Husqvarna 281 XP Information The Husqvarna 281 XP is a professional-grade chainsaw that is designed for demanding applications. It features a powerful 80.7cc engine that delivers 4.2 kW of power, making it ideal for felling large trees and limbing. The 281 XP also features a number of features that help to reduce vibration and fatigue, making it more comfortable to use for extended periods of time. Image of Husqvarna 281 XP chainsaw Here is a table of the full specifications of the Husqvarna 281 XP:
Read more